Introduction
Technical data
Build your own KESLA
Videos
Downloads
Features
Dealers

Compact and efficient C645

The wide model range of KESLA C645 product family of chippers is suitable for mounting on trailers. KESLA C645 is a comprehensive solution with very high output, low fuel consumption, and good off-road properties.

Rotor option for KESLA C645 chippers is LogCUT rotor.

The chassis of KESLA C645S model is equipped with fixed drawbar. The chipper unit is fixed in the front of the axle which enables the low structure and generous drawbar tip load. The KESLA C645T model’s carrying capacity is increased by rocking tandem axle. Hydraulic disc brakes are available as on option.

Сhassis of KESLA C645S-II can be equipped with hydraulically articulated drawbar as an option. The chipper unit is mounted on top of the leaf suspended axle and pneumatic brakes come as standard. The model’s 645T-II carrying capacity is increased by its chassis structure.

Features

Intake opening

Size of the intake opening varies according to the model. Sizes are: 45x60 cm, 60x80 cm or 60x100 cm.

Eyelet options

For chippers KESLA C645S-II, C645T-II and C1060T-models there are a few eyelet models available.

Wastescrews

Waste screws take the fine matter away from the feed mat past the rotor.

Tool box

The chipper can be equipped with a tool box. The box can be whether vertical or horizontal.

Several spout options

Depending on the model, there are several spout options available; more or less curvy, different height or with single or double peak.

Hydraulics designed for chipper and crane operations

The hydraulic system is optimal for chipper and crane operations.

Efficient KESLA cranes

The KESLA cranes are well suited for chipper use - whether with KESLA chipper or other brands. Remember also good variety or bioenergy grapples in the proG series.

Several screen alternatives

Several screen alternatives are available for each model. The screen for C860 and C1060 are graded.

Size of chips is easily adjustable with screens

The size of chips is easily change with changing screen. Changing does not require any special tools.

Changing the knives in 15 minutes

Changing the knives is easy - taking about 15 minutes.

Cutting knives

The patented cutting knife-solution makes chipping efficient and fuel-economic.

Service-friendliness

Circumference of the blower and spout has replaceable scuff blades. Lower part of the spout has maintenance flaps. Also the form of the chipper has been designed so, that it is easier to keep it tidy.

Service-friendliness

Cutting knives

The patented cutting knife-solution makes chipping efficient and fuel-economic.

Changing the knives in 15 minutes

Changing the knives is easy - taking about 15 minutes.

Size of chips is easily adjustable with screens

The size of chips is easily change with changing screen. Changing does not require any special tools.

Several screen alternatives

Several screen alternatives are available for each model. The screen for C860 and C1060 are graded.

Efficient KESLA cranes

The KESLA cranes are well suited for chipper use - whether with KESLA chipper or other brands. Remember also good variety or bioenergy grapples in the proG series.

Hydraulics designed for chipper and crane operations

The hydraulic system is optimal for chipper and crane operations.

Wastescrews

Waste screws take the fine matter away from the feed mat past the rotor.

Eyelet options

For chippers KESLA C645S-II, C645T-II and C1060T-models there are a few eyelet models available.

Technical data

Switch units ^beta

Model	Kesla C645	Kesla C645C	Kesla C645S	Kesla C645S-II	Kesla C645T	Kesla C645T-II
Chip output (m3/h)	160	160	160	160	160	160
Fuel comsumption (l/m3)	0.5	0.5	0.5	0.5	0.5	0.5
Power requirement (kW)	100-220	100-220	100-220	100-220	100-220	100-220
Electric system (V DC)	12 V DC	12 V DC	12 V DC	12 V DC	12 V DC	12 V DC
Weight w/o crane (kg)	4700	19500	7800	7900	8900	8200
Length (mm)	-	7750	5540	5660	6860	5660
Width (mm)	-	2650	2350	2550	2550	2550
Maximum height (mm)	-	4000	3640	4000	3640	4000
Ground clearance (mm)	-	600	360	420	420	420
Axles ()	-	2	1	1	2	2
Intake opening (mm)	630x400	630x400	630x400	630x400	630x400	630x400
Drum diameter (mm)	570	570	570	570	570	570
Knives (pcs)	6	6	6	6	6	6
Drum rpm (rpm)	800-1000	800-1000	800-1000	800-1000	800-1000	800-1000
Height of the discharge chute (mm)	-		4850	5300	4850	5300
Container volume (m3)	-	16

Videos

Build your own KESLA

Choose model

Choose accessories

Flapdown stabilizers

The sturdy flapdown stabilizers make the chipper combination stable.
Hydraulic pump 70 l/min for the crane
Hydraulic pump 200 l/min for the crane and the chipper
Control armrest

The control armrest for right or left side.
Central lubrication system for the chipper and the crane

SKF central lubrication system is available for the chipper.
Briage-monitor system

Briage camera can be mounted onto spout or backside of a trailer.

Model: No selection

Selected equipment

Productfamily FAQ

What things influence in chip output in practice?

There are several things influencing in the output beside the efficiency of the chipper itself. E.g. available efficiency, condition of the knives, material and screen size, to mention some.

Is KESLA proCAB cabin suitable for chipper control?

Yes, Kesla proCAB cabin are well suited for truck chipper use. Especially the bigger XL cabin provides good working conditions and is especially planned for chipper use.

How often must the chipper be serviced?

The need for service depends on the amount of use. In the user manual there are detailed instructions for servicing intervals and points for your chipper. Of course, the condition of the chipper must be checked daily.

Question form

Dealers

Aebi Suisse SA

Platanenstrasse 1
3236 GAMPELEN
SWITZERLAND
info@aebisuisse.ch
+41 32 312 7030
http://www.aebisuisse.ch

Truck and stationary cranes, Grapples, Chippers, Harvester Heads, Tractor Attachments, Forest machine cranes

C645

Compact and efficient C645

Features

Intake opening

Eyelet options

Wastescrews

Tool box

Several spout options

Hydraulics designed for chipper and crane operations

Efficient KESLA cranes

Several screen alternatives

Size of chips is easily adjustable with screens

Changing the knives in 15 minutes

Cutting knives

Service-friendliness

Service-friendliness

Cutting knives

Changing the knives in 15 minutes

Size of chips is easily adjustable with screens

Several screen alternatives

Efficient KESLA cranes

Hydraulics designed for chipper and crane operations

Wastescrews

Eyelet options

Technical data

Videos

Build your own KESLA

Productfamily FAQ

Dealers

Aebi Suisse SA

AGCO Suomi Oy / Aki Pellinen

AGCO Suomi Oy / Antti Janhonen

AGCO Suomi Oy / Antti Marttila

AGCO Suomi Oy / Antti Mäntylä

AGCO Suomi Oy / David Koping

AGCO Suomi Oy / Esa Sutinen

AGCO Suomi Oy / Hannu Vaskela

AGCO Suomi Oy / Janne Jakobsson

AGCO Suomi Oy / Jarkko Hirvi

AGCO Suomi Oy / Jarmo Tynilä

AGCO Suomi Oy / Juha Voutila

AGCO Suomi Oy / Juha Yliklaavu

AGCO Suomi Oy / Jukka Jaakkola

AGCO Suomi Oy / Jukka Lemmetyinen

AGCO Suomi Oy / Jukka Tarsia

AGCO Suomi Oy / Jukka Uusitalo

AGCO Suomi Oy / Jyrki Akkanen

AGCO Suomi Oy / Kalle Patsi

AGCO Suomi Oy / Kari Sorola

AGCO Suomi Oy / Kenneth Lindqvist

AGCO Suomi Oy / Kimmo Kinnunen

AGCO Suomi Oy / Markku Järvinen

AGCO Suomi Oy / Markku Laajalahti

AGCO Suomi Oy / Marko Alava

AGCO Suomi Oy / Marko Puumalainen

AGCO Suomi Oy / Mauri Kuisma

AGCO Suomi Oy / Mika Ahonen

AGCO Suomi Oy / Mika Kivelä

AGCO Suomi Oy / Mikko Harakka

AGCO Suomi Oy / Pekka Oja

AGCO Suomi Oy / Reima Luoma

AGCO Suomi Oy / Samuli Jauhiainen

AGCO Suomi Oy / Seppo Kuutti

AGCO Suomi Oy / Stefan Jansson

AGCO Suomi Oy / Topi Väänänen

AGCO Suomi Oy / Tuomas Ventomaa

AGCO Suomi Oy / Tuomo Korvala

AGCO Suomi Oy / Tuomo Mattila

AGCO Suomi Oy / Vesa Laiho

Agon Pacific. Co.,Ltd.

Agon Pacific. Co.,Ltd.

Bóbr S.C.

Caledonian Forestry Services Ltd

CARGOEQUIP, S.L

Domingos prekyba UAB

Ecomak SpA

Garage S.M. Audet inc.

HSM Company, Ltd.

Inderfor S.A.

Kesla GmbH